Analytics & Fault Detection
Advanced data analytics and automated fault detection to optimise performance and prevent equipment failures.
What We Deliver
We deploy analytics and fault detection diagnostics (FDD) solutions that continuously monitor your building systems for anomalies, inefficiencies and impending faults. By correlating data from BMS, energy meters and IoT sensors, our platform identifies issues such as simultaneous heating and cooling, stuck dampers and degrading equipment performance.
Early detection means lower repair costs, fewer tenant complaints and sustained energy performance over time.
Key Capabilities
- Automated fault detection and diagnostics
- Predictive maintenance alerts
- Energy regression analysis
- Equipment performance benchmarking
- Custom rule engine and threshold configuration
SyncAnalyticsPro
A purpose-built analytics engine running natively on Niagara Framework. Real-time fault detection, alarm analytics, and AI-powered diagnostics for your entire building portfolio.
Alarm Analytics
Gain full visibility into alarm performance with real-time KPIs, priority distribution, and source analysis. Instantly identify recurring issues and measure clearance rates across your entire portfolio.
- Track clearance rates, recurring alarms, and source distribution
- Priority-based donut chart for instant severity overview
- Drill into top alarm sources to isolate problem equipment
- Historical trend analysis for alarm reduction tracking
Detects conflicting heating and cooling outputs
Supply air exceeds setpoint tolerance +/- 2 deg C
Power demand exceeds baseline by 20%
OA damper position below minimum ventilation
Fault Detection & Diagnostics
Deploy automated fault detection rules from a library of 41+ industry-standard diagnostics. Each rule continuously monitors your BMS data and flags issues before they escalate into costly failures.
- Library of 41+ pre-built rules covering HVAC, energy, and AHU systems
- Configurable severity levels: Critical, High, Medium
- Toggle rules on or off per-site with no coding required
- Automatic root-cause suggestions for every detected fault
Summarize current alarms
Based on the last 24 hours, here are the key findings:
- 1 critical fault: simultaneous heating & cooling on AHU-3
- 12 recurring alarms from FCU_01, likely sensor drift
- 100% clearance rate maintained across all zones
Recommendation: Schedule inspection for FCU_01 temperature sensor.
What is the energy impact of the AHU-3 fault?
The simultaneous heating & cooling on AHU-3 has been active for 4.2 hours. Estimated waste:
Fixing this could save ~$920/week across all affected zones.
AI Chat Agent
Ask questions about your building data in natural language. The AI assistant summarizes alarms, identifies patterns, and provides actionable recommendations, all grounded in your live BMS data.
- Natural-language queries across all connected BMS data
- Contextual alarm summaries with root-cause analysis
- Energy impact calculations for every detected fault
- Grounded in your real-time and historical data with no hallucinations
Far outside normal range, possible sensor failure
Brief thermal event, correlates with cooling shutdown
Sustained high temperature, check airflow obstruction
Anomaly Detection
Automatically detect outliers and abnormal patterns in sensor data using statistical analysis. Surface critical anomalies before they trigger alarms or cause equipment damage.
- Statistical outlier detection on any BMS data point
- Visual timeline with threshold bands and anomaly markers
- Severity classification from minor deviation to extreme outlier
- Integrates with FDD rules for closed-loop diagnostics
$42,800 saved this quarter
18% reduction vs. same period last year
Energy Performance
Monitor real-time energy consumption, track efficiency scores, and identify savings opportunities across every building system. Visualize 24-hour load profiles and consumption breakdowns at a glance.
- Real-time efficiency gauge with live power metrics
- System-level breakdown: HVAC, vertical transport, hydraulics, fire, lighting, and IT
- 24-hour load profile with peak demand identification
- Automated cost tracking and quarterly savings reports
Portfolio Health Monitor
View the health status of every connected site in a single dashboard. Track health scores, active fault counts, and energy loads across your entire building portfolio in real time.
- Aggregated health scores for every connected site
- At-a-glance fault counts and status indicators
- Real-time energy load monitoring per-site
- Instant drill-down from portfolio to individual building
Built Natively on Niagara Framework
Unlike cloud-only SaaS analytics platforms, SyncAnalyticsPro runs entirely within your Niagara 4 supervisor, keeping your data on-premise, reducing latency, and eliminating recurring cloud costs.
Platforms & Protocols
We work with industry-leading platforms and open protocols to deliver robust, future-proof solutions.
Why It Matters
Tangible outcomes our clients experience when they invest in this service.
Up to 40% reduction in reactive maintenance
Extended equipment lifespan
Sustained energy savings post-commissioning
Faster root cause analysis for comfort complaints
Related Case Studies
See how we have delivered this service for clients across Australia.
Let's Discuss Analytics & Fault Detection
Whether you need a new solution or an upgrade to your existing system, our team is ready to help you achieve measurable results.